nord NORDAC START Series, User Manual

Page: 31 / 120

2 Assembly and installation
BU 0135 en-4118 31
2.1.1.1 Adapters for different motors
In some cases, the terminal box attachments are different for different motor sizes. Therefore, it may
be necessary to use adapters to mount the device.
In order to ensure that the maximum IPxx protection class of the device is provided for the entire unit,
all elements of the drive unit (e.g. motor) must correspond to at least the same protection class.
Information
External motors
The adaptability of motors from other manufacturers must be checked individually!
Information about converting a drive to the device can be found in
BU0320 .
1 SK 1x5E
2 Adapter plate
3 Gasket
4
Motor, size 71
Figure 4: Example of motor size adaptation
NORD motor sizes Attachment
SK 1x5E size 1
Attachment
SK 1x5E size 2
Size 63 – 71
with adapter kit I Not possibl e
Size 80 – 112
Direct mounting with adapter kit II
Size 132 Not possible Direct mounting
Overview of adapter kits
Adapter kit Name Components Part No.
Adapter kit I
IP55 SK TI4-12-Adapter kit_63-71 Adapter plate, terminal box frame
seal and screws 275119050
IP66 SK TI4-12-Adapter kit_63-71-C 275274324
Adapter kit II
IP55 SK TI4-3-Adapter kit_80-112 Adapter plate, terminal box frame
seal and screws 275274321
IP66 SK TI4-3-Adapter kit_80-112-C 275274325