background image

 4. 

MIdI  | 15

scENarIo 3: Nord ElEctro 5...

rEcEIvING MIdI oN Part UPPEr IN 
MIdI UPPEr rEcEIvE ModE

In this scenario, the Nord Electro 5 is set up to receive MIdI on Part Upper, using an external key-
board to play its corresponding sound engine. Part lower is played with the keyboard of the Nord 
Electro 5, using one of the remaining sound engines. In this setup, Part lower will utilize the entire 
keyboard of the Nord Electro 5 and Part Upper can only be addressed through MIdI sent to the 
Upper split channel.

MIdI Menu settings

Parameter

Setting

local control Mode

on

channel Global

1-16 or off

channel lower rcv

1-16 or off

channel Upper rcv

1-16 or off

channel Upper split

1-16

KB split settings

Parameter

Setting

KB split

on

KB split Point

MIdI Upper rcv

MIDI Connections: 

connect a 5-pin MIdI cable between the MIdI IN of the Nord Electro 5 and 

the MIdI oUt of the external keyboard.

scENarIo 4: Nord ElEctro 5...

WItH a sEQUENcEr

there are a few different ways in which you could set up the Nord Electro 5 together with a 
sequencer. You could either simply use it as a controller keyboard (see scenario 1) to control 
software synths in a daW setup, or use the sequencer for recording of MIdI data, in turn played 
back by the Nord Electro 5.

the most common way of doing this would be to use the global MIdI channel both for sending 
MIdI from the Electro 5 and receiving it back from the sequencer. that way the Nord Electro 5 
will play back any sound the same, whether controlled by the local keyboard or the sequencer. 
to avoid double Note on messages, which may cause sound defects, make sure that channel 
lower/Upper rcv are both set to off.

MIdI Menu settings

Parameter

Setting

local control Mode

off

channel Global

1-16 or off

channel lower rcv

off

channel Upper rcv

off

channel Upper split

1-16 or off

KB split settings

Parameter

Setting

KB split

on

KB split Point

MIdI Upper rcv

MIDI Connections: 

connect a UsB cable between the Nord Electro 5 and your computer, or 

a 5-pin MIdI cable between the MIdI oUt of the Nord Electro 5 and the MIdI IN of your MIdI 
interface.

Summary of Contents for Electro 5D 61

























Reviews: