Norcold N400 Installation Manual Download Page 2

Installation Manual  2

Safety Instructions

Safety Awareness

Read this manual carefully and understand the contents before
you install the refrigerator.

Be aware of possible safety hazards when you see the safety
alert symbol on the refrigerator and in this manual. A signal
word follows the safety alert symbol and identifies the danger of
the hazard.  Carefully read the descriptions of these signal
words to fully know their meanings.  They are for your safety.

WARNING:

  This signal word means a hazard, which if

ignored, can cause dangerous personal injury, death, or
much property damage.

CAUTION:

  This signal word means a hazard, which if

ignored, can cause small personal injury or much
property damage.

WARNING:

-  This refrigerator is not approved for use as a free

standing refrigerator.  It is equipped for the use of
propane gas only and can not be changed to use any
other fuels (natural gas, butane, etc.).

-  Incorrect installation, adjustment, alteration, or mainte-

nance of this refrigerator can cause personal injury,
property damage, or both.

-  Obey the instructions in this manual to install the intake

and exhaust vents.

-  Do not install the refrigerator directly on carpet.  Put the

refrigerator on a metal or wood panel that extends the full
width and depth of the refrigerator.

-  Do not allow anything to touch the refrigerator cooling

system.

-  Propane gas can ignite and cause an explosion that can

result in property damage, personal injury, or death.  Do
not smoke or create sparks.  Do not use an open flame
to examine the propane gas supply line for leaks.  Always
use two wrenches to tighten or loosen the propane gas
supply line connections.

-  Make sure the electrical installation obeys all applicable

codes.  See “Certification and Code Requirements”
section.

-  Do not bypass or change the refrigerator’s electrical

components or features.

-  Do not spray liquids near electrical outlets, connections,

or the refrigerator components.  Many liquids are
electrically conductive and can cause a shock hazard,
electrical shorts, and in some cases fire.

-  The refrigerator cooling system is under pressure.  Do

not try to repair or to recharge a defective cooling system.

-  The cooling system contains sodium chromate.  The

breathing of certain chromium compounds can cause
cancer.  The cooling system contents can cause severe
skin and eye burns, and can ignite and burn with an
intense flame.  Do not bend, drop, weld, move, drill,
puncture, or hit the cooling system.

CAUTION:

-  The rear of the refrigerator has sharp edges and corners.

To prevent cuts or abrasions when working on the
refrigerator, use caution and wear cut resistant gloves.

Table of Contents

Safety Awareness ....................................................................... 2
Safety Instructions ...................................................................... 2
Certification and Code Requirements ....................................... 3
Ventilation Requirements ........................................................... 3
Assemble the Enclosure ............................................................ 4
Install the Lower and Upper Vents ............................................. 4
Install the Refrigerator ................................................................ 5
Installation Options .................................................................... 6

Install the decorative door panel ......................................... 6
Reverse the door swing ...................................................... 6
Change the travel latch position ......................................... 6

Connect the Electrical Components .......................................... 7

Connect the 120 volt AC supply .......................................... 7
Connect the 12 volt DC supply (model N400.3) ................. 7
Connect the 12 volt DC supply (model N510.3) ................. 8

Connect the Propane Gas Components ................................... 8

Connect the propane gas supply system ........................... 8
Examine the gas supply system for leaks .......................... 9

Ignition Start Up .......................................................................... 9

Ignition-propane gas operation (N400 models) ................ 9
Ignition-propane gas operation (N510 models) .............. 10

Summary of Contents for N400














Reviews: