Installation Manual 8
- The wire connections must be clean, tight and free of corrosion. If any of these items are not correct, a voltage drop to the
refrigerator will occur.
The voltage drop will decrease the cooling performance of the refrigerator. Disconnect the positive (+) DC
power supply wire from the battery before you do a “fast charge” of the battery. Failure to disconnect the
positive (+) power supply wire from the battery during a “fast charge” can cause damage to the refrigerator
or other DC appliances.
Controls:
-
Touch and release the ON/OFF [1] button to turn the refrigerator on.(ART02735)
- If the indicator light, below the button, glows solid blue, it means the
refrigerator is operating correctly.
The freezer compartment and cabinet work
independent of each other and both must be
adjusted to their desired
temperature setting.
- Touch the FREEZER COMPARTMENT [5] button to set the
compartment temperature setting.
-Using the + [4] or – [2] buttons adjust the temperature setting.
- The mode [3] will display the temperature setting
- 0 is off
- 1 is the warmest setting
- 5 is the coldest setting
- Touch the CABINET COMPARTMENT [6] button to set the compartment temperature setting.
- Using the + [4] or – [2] buttons adjust the temperature setting.
- The mode [3] will display the temperature setting
- 0 is off
- 1 is the warmest setting
- 5 is the coldest setting
- Press any button to return the control to activate mode, the mode [3] will illuminate. The display will return to standby mode after 5
seconds.
-Touch the NIGHT MODE [7] button to set the refrigerator to night mode.
- Night mode will turn off automatically after 8 hours or if you push the night mode button again to turn the blue indicator light off.
- This 8 hours can be changed by pressing the night mode button for 3 seconds. After the 3 seconds, the default 8 hour hours will be
shown in the display . To change this setting, press the “+” or “-”, then press night mode button to make the setting go into effect.
- The new setting is archived in the memory until it is changed.
Shut down:
- To shut down the refrigerator, touch and hold the ON/OFF button [1] for 5 seconds and release
- Once the refrigerator is turned OFF there is a 5 minute wait cycle before the refrigerator can be turned ON. The refrigerator will not
turn on again until the 5 minute wait is up.
Do not operate the refrigerator when the ambient temperature is higher than 110° F. Operation when the
ambient temperature is higher than 110° F. can cause poor cooling performance and permanent damage to
the compressor.
DC Operation Guidelines:
Do not operate the refrigerator on battery power only. Operation of the refrigerator directly from the battery
will rapidly discharge the battery. Correctly supply DC power to the refrigerator.
The refrigerator gets DC power from the vehicle battery system. The battery system also supplies power to any other DC appliances or
accessories of the vehicle.
A dual battery system provides the best power usage. This system uses two batteries. One battery supplies DC power only to the
vehicle engine and its accessories. The second battery supplies DC power only to the DC appliances of the vehicle. An alternator
powered by the vehicle engine, charges both of the batteries.
Connect the Electrical Components
CAUTION
!
CAUTION
!
1
2
3
5
4
6
7
ART 02735
NOTICE
CAUTION
!