Norco MITX-6922, User Manual

Page: 46 / 55

MITX-6922
Mini-ITX Motherboard Based on Intel QM67/QM77 Chipset
39
Bootup Numlock State [On]
Show Full Logo [Disabled]
Boot Option Priorities
Boot Option #1
[SATA PM:WDC WD10
…
]
Hard Drive BBS Priorities
→←：
Select Screen
↑↓：
Select Item
Enter
：
Select
+/-
：
Change Opt.
F1
：
General Help
F9
：
Optimized Defaults
F10
：
Save&Exit
ESC
：
Exit
Version 2.10.1208. Copyright
（
C
）
2010 American Megatrends
，
Inc.
Setup Prompt Timeout
Number of seconds to wait for setup activation key. If not press setup activation key
within the preset time slot, system will continue starting up.
Bootup Numlock State
This function allows the keypad's digital lock function to be activated after the system is
powered on to the DOS system.
[ON]: Numlock is activated when system boots up
[OFF]: Numlock under cursor control.
Show Full Logo
System starts up option. [Enabled]: Display static LOGO screen at startup, [Disabled]:
Display self-check information at startup.
Boot Option #1
The system will test the device in the set order until it finds a device that can be started and
then starts from the device. Among the startup options, # 1 is the most preferred startup device.
Hard Drive BBS Priorities
This item contains hard disks that can be used as boot devices. If there are multiple hard
disks, the priority of these disks should be selected in this item. The top priority hard disks will
be displayed in Boot Option #1.