Norco BIS-6540HD, User Manual

Page: 71 / 86

BIS-6540HD
Based on Intel Atom Processor Full HD Compact Signage Platform
55
if you have installed a new add-on and system configuration has caused such a conflict that OS
cannot boot.
Resources Controlled By
The commands here are <Auto>or <Manual>.Choosing <manual> requires you to choose
resources from each following sub-menu. <Auto> automatically configures all of the boot and
Plug and Play devices but you must be using Windows 95 or above.
PCI/VGA Palette Snoop
When set to <Enabled>, various VGA devices which are working on different bus can
handle data from CPU on different color palette of different video device. Stored in the 5th bit in
the PCI device command cache is the VGA color palette(0 is disabled). For example: if there
are two VGA devices(one is PCI and the other is ISA), the setting should be like: if any ISA
adaptor installed in the system require VGA color palette, this item should be set to <Enabled>.
INT Pin1-8 Assignment
The option to connect to the computer's motherboard, a PCI interface device designated
IRQ allocation, The choice: <AUTO> ， <3> ， <4> ， <5> ， <7> ， <9> ， <10> ， <11>.
Maximum Payload Size
This allows you to set the PCI Express devices largest TLP (Transport Layer Packet)
payload value
。
The choice
：
<128>
，
<256>
，
<512>
，
<1024>
，
<2048>
，
<4096>.
4.7 PC Health Status
Annotate
：（
Green shows the following numerical values for the read-only
）