9
Network Connection & IP assignment
The encoder supports the operation through the network. When a encoder is
first connected to the network, it is necessary to allocate an IP address to the
device with the
“SmartManager” utility on the CD. (Default IP 192.168.30.220)
1) Connect the encoder/device to the network and power up.
2) Start SmartManager utility (Start
>
All programs
>
SmartManager
>
SmartManager). The main window will display, and after a short while
any network devices connected to the network will be displayed in the
list.
3) Select the encoder on the list and click right button of the mouse. You
can see the pop-up menu as below.
4) Select Assign IP Address. The Assign IP window will display. Enter the
required IP a d d r e s s .
NOTE:
For more information, refer to the SmartManager User Manual.
Summary of Contents for VK2-HDA-ENC1
Page 9: ...50303xxxx...
