DB-9 Pin Configuration For RS-232 Port
Pin
Use Pin
Use
1 DCD
6
Not
Connected
2 RX
7 RTS
3 TX
8
CTS
4
Not Connected
9
Not Connected
5 Ground
1.6 Power-Up
Select the correct voltage before supplying power to the
unit. Use the voltage selector switch located on the rear
panel of the unit, between the power connector and the
On/Off Switch.
Caution:
Applying incorrect voltage could damage unit.
Once the correct voltage has been selected and all
connections have been made, apply power to the unit.
1.7 Front Panel Indicators
Hard Drive Status Indicators (Green Lights)
Light On:
Drive present and operating.
Light Flashing:
Drive present, error detected.
Light Off:
No drive present, or drive damaged beyond recognition.
Hard Drive Activity Indicators (Red Lights)
The light blinks when the drive is being accessed (read or write).
Ethernet Indicators
The Ethernet feature is currently being developed for future implementation.
LCD Display
Once power-up is complete, the LCD displays the total disk storage capacity of
the unit.
Key Pad
This feature is currently under development for future implementation.
Norbain VAIDe
6
0150-0186b
Summary of Contents for VAIDe
Page 1: ...Norbain VAIDe User Manual ...
