EN
91
Installing and removing the unit
Installing the unit
3
4
mm
18 2
53 mm
3
1
2
1
2
2
1
Control panel
Control panel
Trim plate
Trim plate
Sleeve
Dashboard
Screw (not included in
this packing)
Sleeve
Bend the appropriate
tabs to hold the sleeve
firmly in place.
Before attaching, make
sure the direction of the
escutcheon is correct.
(Wider hooks on the
bottom side.)
Removing the unit
1
Detach the control panel.
2
Engage the catch pin on the removal tools into the holes on both
sides of the escutcheon, then pull it out.
3
Insert the disassembly tools deeply into the slots on each side,
then follow the arrows instructions as shown on the right.