NORAUTO 872503, Manual

Page: 93 / 153

92
Bluetooth mode
Disconnecting a Bluetooth
Device
To disconnect one device, touch [Disconnect].
After "Disconnect" is pressed, the radio will
display a screen listing paired devices.
Pressing the Green "Plug" icon will reconnect
a previously paired phone to the BT radio.
Pressing the "Wastebin" icon next to a
device's name will unpair the phone from the
radio.
Notes:
• The device will be disconnected when the
device is moved beyond the operational
range.
• If you want to reconnect the device to the
unit, place it within the operational range.
• If you do not want to reconnect the device
to the unit automatically, touch [Options],
then set [Auto connect] to [OFF]. For details,
see the “Adjust Bluetooth Settings” section.
Making a Call
1. Select Bluetooth function in the home
menu.
2. On Option page, see the "Phone Synch"
item, and press "Synch" to synchronize the
phone book with the BT. If you have many
contacts, this may take up to 3-4 minutes.
3. Search for phone number from the
following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch
[ ] to dial.
Receiving a Call
By default, all incoming calls are received
automaticaly.
1. If there is an incoming call, the screen will
display “Incoming call...”.
2. Touch the screen to select [hang up] or
[Answer]. Speak into the Bluetooth micro -
phone.
Tip
• You can select to receive calls manually by
setting [Auto answer] to [OFF] .
Adjust Bluetooth Settings
1. In Bluetooth menu, touch [ Options ]. The
option menu is displayed.
2. Touch on the selected option to change the
setting.
• [Bluetooth]: To turn the “Bluetooth”
function ON or OFF.
• [Auto connect]: To turn the “Auto Connect”
function ON or OFF .
• [Auto answer]: To turn the “Auto Answer”
function ON or OFF .
•
[Pairing code]: To set the paring code.
• [Phone synch]: To synchronize phone
book, touch [ OK ] on the sub-menu
Phonebook Synch may take several
minutes to load on initial setup.