130
Installation Opening
This unit can be installed in any dashboard having an opening as shown below. The dashboard
should be 4.75mm - 5.56mm thick in order to be able to support the unit.
If the opening is too small, carefully cut or file as necessary until the sleeve easily slides into the
opening. Do not force the sleeve into the opening or cause it to bend or bow. Check for sufficient
space behind the dashboard for the unit chassis.
Reset
Press the RESET button with a pointed object to reset the unit to the original status.
Note: Press the RESET button will erase the clock setting and stored stations.
Installation Procedures
1. If relevant, remove any other audio system from the car.
2. Insert the mounting sleeve into the dashboard. Fix it firmly in place by folding down the metal
tabs.
3. Perform the required electrical connections.
4. Then check that everything works before installing the main unit.
5. Remove the two screws on the top of the unit, otherwise, the unit will not work.
6. Install the car radio in the dashboard using the supplied screws (M5x6mm).
7. Attach the outer trim frame.
If you are not sure how to install this unit correctly, contact a qualified technician.
INSTALLATION GUIDE
Mounting sleeve
Main unit
Trim plate
Remove the
two screws
Mounting bolt
Rubber cushion
