33
Testing
ACC on, left and right waning light flash 1-2seconds, system self testing
While moving objects is closing and enter the detection area, the corresponding direction of display will
“Bi” and flash for warning (the detecting relative velocity has to be over 5km/h and less than 40km/h)
Attention:
Radar can only work under the PLASTIC bumper, can not work for metal bumper
Troubleshooting
Error
Reason
1. Display without any
sound
• ACC did not in ON position
• Fuse damaged
• ECU damaged
• Display damaged
• Turn signal cable is improperly inserted
• Display cable is improperly inserted
• ECU cable is improperly inserted
• The moving object relative speed is lower 5km/h or fast than 40km/h
• The hazard warning lights are turned on
2. Display light not turn on
• ACC did not in ON position
• Fuse damaged
• ECU damaged
• Display damaged
• Display cable is improperly inserted
• ECU cable is improperly inserted
• The moving object relative speed is lower 5km/h or fast than 40km/h
3. light always on while
there is not moving
object.
• ECU damaged
• Sensor damaged
• Sensor cable is improperly inserted
4. Detection area is
abnormal
• There is any metal object in front of the sensor e Installation did not
follow the manual
• Stormy weather or heavy snow etc.
• The moving object relative speed is lower 5km/h or fast than 40km/h
5. Wrong alert
• There is any metal object in front of the sensor
Disposal of the product
Selective collection of waste electrical and electronic equipment.
Electrical equipment must not be disposed of with household waste.
Pursuant to European Directive 2012/19/EU on waste electrical and electronic equipment,
and its transposition into national law, waste electrical equipment must be collected
separately and disposed of in designated collection points. Contact the local authorities or the
vendor for advice on recycling.