NorAire EB-HPH Series, Installation & Operating Instructions Manual

Page: 1 / 52

09/06/2018 BI903
Installation & Operating Instructions
Model: EB-HPH*
Application
– This is a heating only product. There are no previsions for cooling mode operation
 Radiant in-floor heating – Single zone or multiple zone.
 Baseboard heating – Special “High Temperature Operation”
 Hydronic water to air coil above an air handler – Special “High Temperature Operation”
 Indirect domestic hot water (water to water heat exchanger) – Special “High Temperature
Operation”
 Mixture of the above scenarios (max of one high temperature zone per application)
Accessories
 From the factory, this unit will interface with two thermostats, two pumps / zone valves, a single
stage heat pump compressor, an internal or external electric boiler, an external gas boiler, and
special power company interface for load shedding applications.
Important Installer Information

The NorAire Heat Pump system must be installed by an experienced HVAC installer. Sufficient
knowledge of refrigerant line set installation, system charging, and heating performance testing is
required to perform warranty validation.

Heat Pump Outdoor Unit – manual NI217 contains installation information specific to the heat
pump ODU brand supplied by Electro Industries. Please visit
www.electromn.com for
installation information specific to other brands.
DO NOT DESTROY THIS MANUAL. PLEASE READ CAREFULLY AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE BY A SERVICE TECHNICIAN.
4003560