background image

 

 

The Maintenance screen will display.   

 

The display will begin programming.  Once this 
screen is shown, release the programming switch. 
 

 

After the display is programmed, a touch screen 
calibration prompt will appear.  Touch the center of 
each crosshair (there will be five (5)) with a stylus.  
The crosshairs will appear one at a time; all are 
shown in the graphic for reference. 
It is important to touch each quickly as lingering on 

one will register as the touch for the next.  If one is 
missed, the screen will not function properly and 
the display must be reprogrammed. 

 

While the program is loading, the NORAC main 
screen will be shown.   

 

Once the program is loaded, the NORAC UC5 
Liability screen will be displayed.  The program may 
take up to a minute to load.  Press the check button 
to continue. 

7.

 

Remove the USB drive from the PULSE.  

Reviews: