ALwAYS TuRN off mAIN PowER BEfoRE INSTALLATIoN
INSTALLATION SHOULD BE CARRIED
OUT BY YOUR LOCAL ELECTRICIAN.
6505 Gayhart St., Commerce, CA 90040
www.NoraLighting.com
Page 2 of 2
Shrink wrap Installation Instructions to ensure ETL wet location listing:
1. Have one male and one female end of the tape light.
2. Insert male end of the tape light into the pre-cut shrink wrap supplied by Nora Lighting.
3. Connect the male and female connections inside the shrink wrap. Adjust silicone so both tape lights have sufficient shrink wrap covering
black insulation.
4. Heat the silicone (hair dryer, or flame at least 6" away from tape/silicone) around entire connection to wrap the connection tightly and
maintain ETL wet location listing.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Installation Instructions
***URGENT: READ PRIOR TO ATTEMPTING INSTALLATION***
SPECIALTY LIGHTING
-
RGB LED TAPE LIGHT
Item#
Description
Rating
NUTP3 Series
24V RGB LED Tape Light
24V / 2.5W/ft.
NUPT6 Series
12V RGB LED Tape Light
12V / 2.5W/ft.