6505 Gayhart St., Commerce, CA 90040 | Phone: 800.686.6672 | www.noralighting.com | e-mail: [email protected]
Instructions subject to change without notice. © 2018
073118P2
Installation Instructions
SPECIALTY LIGHTING - LED TAPE LIGHT
READ PRIOR TO ATTEMPTING INSTALLATION
ALWAYS TURN OFF MAIN POWER BEFORE INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN
Shrink Wrap Installation Instructions to ensure cULus listing:
1. Have one male and one female end of the tape light.
2. Insert male end of the tape light into the pre-cut shrink wrap supplied by Nora Lighting.
3. Connect the male and female connections inside the shrink wrap. Adjust silicone so both tape lights have sufficient shrink wrap covering black insulation.
4. Heat the silicone (hair dryer, or flame at least 6” away from tape/silicone) around entire connection to wrap the connection tightly and maintain cULus listing.
NOTE:
Use 45W driver for 1 roll of
NUTP1 tape light or 96W driver for
2 rolls of NUTP1 tape light.
Item No.
Description
Rating
NUTP1 Series
NUTP4 Series
24V Standard LED Tape Light
12V Standard LED Tape Light
24V / 1.85W/ft
12V / 1.5W/ft
Fig. 1
Fig. 2
Fig. 3
Fig. 4