3
NookBox
Installation Guide
Remote Control
Identifying the parts
1.
BUTTON
Press this button to arm the system in away mode.
2.
BUTTON
Press this button to disarm the system. When alarm is activated,
pressing this buttonwill stop the alarm.
3.
BUTTON
Pressing this button will arm the system in home mode.
4.
BUTTON
Press and hold this button for 3 seconds to send a panic signal regardless of system mode
<NOTE>
Panic alarm cannot be stopped after activation by pressing disarm button on Remote Controller.
5. LED INDICATOR
The LED will flash 3 times when the Away Arm, Home Arm and Disarm buttons are pressed.
When the Panic Button is pressed, the LED will quickly flash 6 times.
6. BATTERY COMPARTMENT
The Remote Controller uses one CR2032 3V Lithium battery as its power source. The low battery status
will be sent to the Control Panel along with regular signal transmission, and, the Control Panel will display
the status accordingly.
<NOTE>
When changing battery, after removing the old battery, press any button twice to fully discharge before inserting new battery.
When a low voltage battery is inserted, the LED will flash 3 times to indicate low battery.
