39
Data Output and Software
Download Data from the Monitor
NOTE:
Data cannot be downloaded if there is a
medium or high priority alarm.
1. With the monitor on, but not connected to a patient,
connect a USB flash drive to the monitor.
2. In the “USB Flash Drive Detected” pop-up window,
Download Memory?
displays.
3. Press
OK
to download data. Press Cancel to return to
the operating screen.
4. Once the data download is complete, the “Download
Memory Complete” pop-up window displays. See
.
If the USB drive is disconnecting during the download, the
“USB Drive Failure” pop-up displays.
Clear Memory
This procedure deletes patient data recordings from the
monitor.
1. In the “Download Memory Complete” pop-up window,
Clear Memory?
displays.
2. Press
OK
to clear memory.
3. In the “Clear Memory” pop-up window,
Are you sure?
displays.
4. Press
Yes
.
5.
Memory Cleared
displays.
6. Press
OK
and remove USB flash drive.
7. Operating screen displays.