3
4
ENGLISH
Battery
Indicates separate collection for electrical and electronic equipment (WEEE).
IP33
Protected against spraying water and against access to hazardous parts
with a tool, per IEC 60529.
SN
Serial Number
EC REP
Authorized Representative in the European Community
+70°C
-30°C
Temperature Limitation for storage/shipping
%SpO
2
Percent Oxygen Saturation Display
Pulse Rate Display
Intended Use
GO
2
LED
Model 9571 is intended to measure blood oxygen saturation (%SpO
2
) (the
amount of oxygen in your blood) and pulse rate of both adults and children. It is de-
signed for fingers (not the thumb) between 0.3 and 1.0 inch (0.8 – 2.5cm) thick. The
GO
2
LED
Model 9571 is intended for low perfusion conditions as defined in the specifications
in this manual. Limit finger movement as much as possible when using this device.
Con-
tact your licensed health care professional for your expected oxygen saturation level (to
compare with your readings). The
GO
2
LED
Model 9571 is intended for Home Health
Care Only.
Contraindications
•
Do not use the
GO
2
LED
in a magnetic resonance (MR) environment.
Warnings
•
Keep the oximeter away from young children. Small items such as the battery door,
battery, and lanyard are choking hazards.
•
Certain activities may pose a risk of injury, including strangulation, if the lanyard
should become wrapped around your neck. Use the lanyard with caution.
7366-201-01 GO2 LED User Guide1_ENG.indd 3-4
3/12/2010 10:32:00 AM
