AG 3000 Quick Start
P/N 200-1021-001-M
|
1
|
Copyright © 2005 Nomadix, Inc.
This document provides instructions and reference material for getting started with the Nomadix
Access Gateway 3000 (AG 3000) product. If you have any problems, please contact our
technical support team at +1.818.575.2590, or email:
.
Start Here
1.
Unpack the AG 3000 and place the product on a flat and stable work surface.
2.
Connect the power cord.
3.
Connect the DB9 female-to-female (NULL) serial cable (6ft. length) between the
product’s “serial port” and your computer.
4.
Power up your computer and turn on the product.
5.
Start a HyperTerminal session to communicate with the AG 3000 via the product’s serial
interface. Use the following configuration settings for your session:
Bits per Second
Data Bits
Parity
Stop Bits
Flow Control
9600 8 None 1 None
6.
Log in to the Command Line interface:
The default for both the Username and Password is
admin
.
7.
Go to the “Configuration” section on the next page and configure the AG 3000 for your
network.