HPF Selector:
This control determines the frequency of the high pass filter, 5 frequencies are available :
Off - 20, 30, 40, 60, 80 Hz
9- Equalizer - High Pass Filter :
10- Equalizer - EQ-CP, Limiter, Phase, Power :
EQ-CP:
- This control determines:
- OFF = compression applied before the EQ section.
- ON = compression applied after the EQ section.
Limiter:
- This control
applies a BrickWall Limiter to the output of the Studio Channel SC-226.
Phase:
- This control inverts the phase of the Studio Channel SC-226.
Power:
- T
urns On/Off the Studio Channel SC-226.
(Bypass)
11- VU-Meter:
Determines what is displayed on the VU meter.
If GR is selected, the meter will show the gain reduction in dB, If the
meter select switch is set to IN or OUT, then the meter will reflect the
input or output signal level.