Caution
If any lights do not work on your pre-lighted tree, please check the following:
TROUBLESHOOTING:
1. If entire tree or a section of the tree does not light:
Tr
oubleshoo
ting
a) Check to be sure that all light set plugs are securely connected to the extension cord.
b) Check that there is power at the electrical outlet.
c) Check fuses in tree’s plugs and replace if necessary (see Fuse Replacement below).
2. If a strand of lights still does not work:
a) Check that all bulbs are tightly fitted inside the sockets and that no bulbs are broken or missing. Replace
any broken or missing bulbs with replacement bulbs provided (see Bulb Replacement below). If all bulbs
are firmly in the sockets, slightly twist the bulbs from side to side to ensure proper connection.
b) If the lights still do not work, carefully remove each bulb one by one from the problem light string. Pull
the bulb AND plastic base straight out of the socket. Do not twist bulbs while removing from sockets.
Check the two wires at the bottom of the bulb holder. Each wire should be aligned properly on the bulb
holder to ensure a proper connection in the bulb socket. If one wire is missing or too short, please
replace bulb with a replacement bulb (provided).
CAUTION! - ALWAYS UNPLUG YOUR TREE FROM ITS POWER
SOURCE BEFORE ATTEMPTING EITHER FUSE OR BULB
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products basic precautions should always be followed including the following:
,
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let bulbs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, or when retiring for the night, or if leaving unattended.
h)
To avoid risk of fire, burns, personal injury and electric shock it
This is an electric product - not a toy!
should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
m) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of
n) This product is equipped with push-in type bulbs. Do not twist bulbs.
o) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check the product. If the replacement fuse blows,
a short circuit may be present and the product should be discarded.
p) Read and follow all instructions that are on the product or provided with the product.
q) 120 V. For indoor use only.
SAVE THESE INSTRUCTIONS
3. Extension cord mounted in middle section (B) hangs freely down into bottom section (C). Position cord
as near to pole as possible.
4. Locate light set plug from bottom section (C) and plug into outlet of extension cord hanging down from
middle section (B) (Fig. 5).
5. Allow branches to fall into place or gently pull branches up and out. When adjusting branches be sure that
all wires are free of branch hinges (Fig. 6).
6. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and
one at the centre of the main stem. Repeat pattern for each branch (Fig. 7).
7. Connect the plug of the extension cord hanging down from bottom section (C) to the wall outlet. Please
l) Do not cover the product with cloth, paper, or any material not part of the product when in use.
electric shock . This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension
cord unless plug can be fully inserted. Do not alter or replace the plug.
REPLACEMENT.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
note this tree comes with an on/off foot pedal switch for easy illumination.
