Tr
oublesho
oting
W
ar
ran
ty
Made in China
Imported by
Noma Canada, Toronto, Canada M4S 2B8
DATE CODE / DATE DE CODE: 22321
Included with each tree are hinge pins/washers. Included with pre-lit trees are spare bulbs. If extra parts are needed, please
contact our customer service centre.
SPARE PARTS
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges. Place the branch into
the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer
washer.
(See Fig. E.)
CAUTION:
1. To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product,
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights and may cause fire, or
electric shock hazards.
1. Unplug cord from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top: gently lift straight up to remove from section below and
fold all branches toward the pole.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint
and rotate the upper pole in both directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below, and fold all
branches toward the pole until the bottom section is removed from the tree stand.
Put the protective cap on the poles to avoid damaging the internal parts.
(See Fig. D.)
5. Carefully place all tree sections into shipping box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing
your tree to excessive heat or humidity may damage your tree.
7. Keep out of reach of pets and children.
STORAGE INSTRUCTIONS
Fig. D
Fig. E
If the tree does not illuminate:
1. Please check to make sure that all plugs are properly connected and that the power cord is plugged into the wall outlet. Refer to
assembly guide for instructions. Try stepping on the ON/OFF button of the foot pedal.
2. Please check for loose, broken or missing light bulbs and replace as needed.
3. When multiple products are connected together, do not exceed the lowest of the
indicated maximum wattage on the cord tag near the connected product's receptacle.
This product carries a five (5) year warranty against defects in workmanship and materials. Noma Canada agrees to replace
a defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
