5.
Continue by inserting the upper tree section(s) to the lower section(s) finishing with the tree top A.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7.Insert green-labeled plug into the wall outlet.
(See Fig. B. )
Your entire tree should now be lit. If some bulbs do not light
or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs
promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8.Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out
one to the right, one to the left and one at the centre of the main stem.
(See Fig. C.)
Fig. C
Side view
Top view
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches
to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
STORAGE INSTRUCTIONS
1.Unplug cord from the wall outlet first and then remove all ornaments and decorations.
2.Disassemble the tree from the top to the bottom. Start with the tree top: gently lift straight up to remove from section
below and fold all branches toward the pole.
3.Continue by gently lifting straight up each section from the section below, and fold all
branches toward the pole until the bottom section is removed from the tree stand.
Put the protective cap on the poles to avoid damaging the internal parts.
4. Carefully place all tree sections into shipping box and tape it shut.
5. When not in use, please store your tree in a cool, dry place away from sunlight.
Exposing your tree to excessive heat or humidity may damage your tree.
6. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician.
7.Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.
For pre-lit trees, if the tree does not illuminate:
1.Please check to make sure that all plugs are properly connected and that the power cord is plugged into the wall outlet.
Refer to assembly guide for instructions. (If the tree comes with a foot pedal, try stepping on the ON/OFF button.)
2.Please check for loose, broken or missing light bulbs and replace as needed and ensure the sections connected well.
3.When multiple products are connected together, do not exceed the lowest of the indicated maximum wattage on the
cord tag near the connected product's receptacle.
Loose Hinge Rivet
1. Extra hinge rivets are included for repairing the hinges. Place the branch into
the slot of the bracket.
2. Insert a new hinge rivet through the hole and secure by clapping the end of
rivet.
(See Fig. D.)
Replace the cord set fuse
Fig. D
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Open fuse cover. Slide fuse access cover on top of attachment plug toward blades.
Replacement
Original
• Remove fuse carefully.
Fuse
Fuse
• Risk of fire. Replace fuse with only a 5 A, 125 V fuse (provided in the plug).
• Close fuse cover. Slide the fuse access cover on top of the attachment plug away from
blades
Replace the light string fuse
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Open fuse cover. Slide fuse access cover on top of attachment plug toward blades.
• Remove fuse carefully.
• Risk of fire. Replace fuse with only a 3 A, 125 V fuse (provided in the replacement bag).
• Close fuse cover. Slide the fuse access cover on top of the attachment plug away from
blades.
CAUTION:
Risk of fire. Do not replace attachment plug.
Do not remove the safety device (fuse). Discard product if the attachment plug is damaged.
SPARE PARTS
Each tree includes hinge rivets, and for pre-lit trees, spare bulbs and fuses are also included. If extra parts are
needed, please contact our customer service centre.
This product carries a one (1) year warranty against defects in workmanship and materials. Noma Canada agrees to
replace a defective product, within the stated warranty period, when returned to the place of purchase with proof of
purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by
Noma Canada, Toronto, Canada M4S 2B8
DATE CODE / DATE DE CODE: 22318
Tro
ub
les
ho
otin
g
W
arr
an
ty
