4
model no. 052-7850-0 | contact us: 1-866-827-4985
5
Installation
Installation
1. Mark the desired area where you want to install. Remove one side of the tape and secure to
the LED puck light. Then remove the other side of the tape and secure to where you want to
install.
2. Remove one side of the double-sided tape and secure it to the sensor.
3. Connect the puck lights to each other using the jumper cable connectors. Then connect
the wave sensor to the desired location.
4. Connect the plug-in adapter connector (A) to the puck light. Then connect the AC/DC
plug-in adapter connector jack end (B) to the adapter connector round socket end.
5. Affix self-adhesive wire guides to desired locations as needed to guide and secure jumper
cables and AC/DC plug-in adapter cord.
6. Plug the AC/DC plug-in adapter into
the power outlet. The LED puck lights
are ready to be used.
REMINDER:
Please read all instructions before assembling and using your new LED puck
light kit.
!
IMPORTANT:
FOR INDOOR AND DRY LOCATION USE ONLY. ADHESIVE TAPE MAY
DAMAGE SURFACE IF REMOVED.
INSTALLATION:
Before installation, make sure the surface you intend to mount the
product on is free of moisture, oil, grease, dust and dirt to ensure proper adhesion.
Test painted surfaces.
7. Operate the light by IR remote controller.
(A)
(B)
Connection options
Turns on the light
Turns off the light
Changes LED colours gradually
Colour jumps in sequence
Increases the brightness of light
Decreases the brightness of light
Light will return to red
0527850_Noma_IM Booklet_color Changing Puck E r11.indd 4-5
2015-10-22 10:41 AM
