Check before turning on the machine
1. Check if the power wire is in good
condition.
2. The product uses a 120 V power
supply. Before use, please confirm the
power socket meets this requirement
and is properly grounded; otherwise,
please replace it with the qualified
socket.
Temperature Control Knob
Safety Protection
Power Selection Knob
Turn off the Heater
7
Insert the plug into the power socket,
then turn the Temperature Control knob
clockwise, when hearing the “pop”
sound (it means the temperature
controller is on), adjust the Temperature
Control knob to the desired temperature
level.
A. Turn the Power selection knob to
OFF position.
B. Turn the Temperature Control knob
counter-clockwise to the initial position.
C. Remove the power plug, store the
heater after the entire machine has
become cool.
1. Overheat protection: When the
temperature in the heater is too high
due to abnormality in the use environ-
ment or improper use, the thermostat
device automatically cuts off the power
and the heater stops working. After the
whole heater cools, the heater can
return to normal use after removing the
abnormality.
2. Tipping protection: When the heater
tips, the safety system will automatically
cut off the power. Once the heater is
placed upright, it will turn on again.
Power Light
When the power light is on, the heater is
plugged in. Please be careful. When the
light is off, the heater does not have
power running to it.
Turn the Power selection knob to select
between 4 functions:
Low " " (1000 W),
High " " (1500 W),
Low swing " " (1000 W),
High swing " " (1500 W).
