1. Take the spinner from the bag. Then remove the plastic nut by turning it
counter-clockwise.
2. Place the rear guard onto the head unit and make sure the handle is facing
upward.
3. Screw on the plastic nut (clockwise) securing the fan’s rear guard onto the head
unit (see Fig. 1).
4. Install the fan blade onto the motor shaft. Make sure the fan blade slot fits into the
retaining pin of the motor shaft.
5. Attach the spinner to the motor shaft by turning it counter-clockwise to secure the
fan blade (see Fig. 2).
6. Align catch of the front guard with the illustrated position of the rear guard. Press
guards sequentially with both hands. Install guard catch (see Fig. 3).
5
Fig. 1
Tighten
Loosen
Spinner
Plastic nut
Fig. 2
Tighten
Spinner
Slot
Blade
Retaining
pin
Fig. 3
Guard
Catch
1
2
3
1
2
3
Front and Rear Guard Installation
GUARD AND FAN BLADE ASSEMBLY
