CARTY-R
1
2
3
4
All rolling code remote or fix code in the list which can be downloaded in the web site,
excluding the remote controls with the source code, see next paragraph.
5 -
Press and release the button to be copied in the remote and wait for a while until the led
CARTY-R
is
flashing quickly to confirm the correct learning copy process.
6 -
While the LED flashes (max 20sec.), press and keep press the corresponding button on
CARTY-R
where you need to copy the original code until the LED switched off to confirm the right
learning copy process.
IN THE RADIO RECEIVER
Choose "
MODE
" in the table:
MODE FAST
or
MODE ENTER
or
MODE MANUAL
1 -
Place the original remote control X in front of
CARTY-R
at 4 cm of distance
2 -
Press and keep pressed button
1
the LED is
green
3 -
Press
four
times the button
2
and the led will be
red
4 - Release all buttons
Red
LED flashes shortly every 2,5 sec.
(8 flashes) for maximum 20sec.
which…..
FAAC
433 / 868
GENIUS
433 / 868
The remote control must be a MASTER, if you press the button the LED flashes twice instead fix light.
5 -
Press and keep pressed the button to be copied until the Led of
CARTY-R
lits on.
6 -
Release the button and wait.
7 -
LED of
CARTY-R
flashes shortly each 2sec.
This indicate that it is time to memorize the
source code.
8 -
Press simultaneously buttons 1 and 2 of FAAC or GENIUS remote control and release them
9 -
LED of the remote control FAAC or GENIUS flashes (max 9sec.)
10 -
Press and keep pressed the button to be copied of FAAC or GENIUS remote control and wait for a
few seconds until the LED
CARTY-R
flashes quickly.
11 -
Press the button which need to be copied and keep pressed
until the LED of
CARTY-R
switched off.
IN THE RADIO RECEIVER
Check the right function of the new remote control
CARTY-R
See
MODE FAST
or
MODE ENTER
pressing twice the memorized button.
CLONE THE FIX AND ROLLING CODE WITHOUT THE SOURCE CODE
CLONE THE ROLLING FAAC / GENIUS
WITH THE SOURCE CODE
INITIALIZING
Compatible remote control, code remote control.
It memorizes four different codes one button each.
