PAGE 13
Mute Mode: Auto
Mute Mode: Low Speed Mute
Notifications
Point of Interest
POI: Alert
Limit Speed Alarm
settings.
1. Auto Mute Mode is selectable and re-
duces the alert vlume by 0%, 20%, 40%,
60%, or 80%. The default is 40%.
2. Radar bands (X, K, and Ka) and POI limit
speed: current volume level stays for the
first 3 seconds after the alert begins,
afterwards, it’s reduced to the selected
Auto Mute level.
Auto Mute is not appli-
cable to laser alerts.
3. Auto Mute ends 10 seconds after the
alert ends. If the same radar frequency
is detected or begins within 10 seconds,
the radar detector keeps Auto Mute
active.
4. If a different radar band is detected or
begins while Auto Mute is active, Auto
Mute will be disabled and will revert
back to the current volume level.
1. All radar alerts on X and K bands are
completely muted and only displayed if
vehicle’s speed is below the Low Speed
Mute setting. Radar detector does NOT
mute Ka band and Laser alerts.
2. Low Speed Mute settings:
• English (MPH): Off, 5, 10, 15, 20, 25,
30, 35, 40, 45, 50, 55 (Default: 20)
• Metric (KM/H): Off, 10, 20, 30, 40, 50,
60, 70, 80, 90 (Default: 30)
When a radar signal is detected, the driv-
er will be alerted by a visual text warning
and a voice/tone alert that will indicate the
detected radar band, frequency and signal
strength. The display will blink for 3 seconds
and a beeping, warning tone will increase its
intensity with increasing signal strength. The
signal strength has 9 levels. The GPS alerts are
reported by voice and text.
1. Press the VOL+/MARK button to register
a POI
2. Pressing the VOL+/MARK button during
a POI alert will delete the POI
3. You can register up to 100 POIs
1. POI alert announces when a database
POI or user POI is detected.
2. POI alerts display the POI icon, distance
to POI, and current speed
3. Display of POI “PASS” message with a
voice announcement when passing a POI.
4. No audio/visual alert when exiting from
POI area without passing by POI
5. POI warning distances:
• Short: 400 ft / 135 m
• Normal: 800 ft / 250 m
• Farther: 1,250 ft / 400 m
• Farthest: 1,650 ft / 500 m
6. POI direction type:
• Database POI: all-, two-, and
single-direction
• User POI: single-direction
7. POI alert operates only when GPS is
connected.
1. Speed Camera alert operates when
driving speed is over the speed limit near
a speed camera.
2. Speed Camera alert message displays
“OVER SPEED” along with voice an-
nouncement or tone.
3. The current driving speed blinks along
with alert sounds until driving speed is
under Speed Camera speed limit.
