EN
18
10.1
Sharing music via Bluetooth (A2DP Sharing)
During the intercom connection, you can start playing music by briefly pressing the “
” key for about 2
seconds. The music will be played in both systems.
Music sharing temporarily cuts off the intercom conversation; however, this can be automatically restored by
stopping the music (this is done by pressing the “
” key for about 2 seconds).
N.B.: Music shared through the intercom can be managed by both systems, for example, both systems can
change the track by pressing the relative command.
N.B.: the “Music Sharing” function can be used with the N-Com series “900” / “600”.
11
SATELLITE NAVIGATOR FOR MOTORCYCLES
B601 system is compatible with the most common satellite navigators for motorcycles. For a list of compatible
models and additional details, visit the website www.n-com.it
To pair up a satellite navigator to the B601 system, follow the procedure illustrated in Chapter 8.
N.B.: Intercom connection is automatically cut off every time the navigator gives directions and restored at the
end of the message from the navigator.
12
N-COM INTERCOM
The N-Com B601 system allows communication with other N-Com systems, up to a maximum distance of
about 250 m (in open field, with no obstacles). The range of the communication varies depending on the N-
Com systems used.
Important: The procedure described below refers exclusively to the pairing up and operation between the
B601 and the “900” / “600” series N-Com systems.
To pair up to N-Com systems of a range other than the “900” / “600” series, please refer to the procedure
described in chapter 13 “Universal Intercom”.
N.B.: The range and quality of the communication may vary significantly depending on the presence of
obstacles, weather conditions, magnetic fields.
12.1
N-Com “900” / “600” Series Intercom pairing up
The TWIN PACK includes two N-Com systems already paired on CHANNEL 1. To connect the systems, please
refer to chapter 12.2.
•
Make sure the systems are turned off.
•
Put the systems in “Configuration” mode: press the “n” key and keep it pressed for 4 seconds, until you
hear the voice announcement “
Configuration Menu
”.
•
On both systems, press the “
” key until you reach the option “
Intercom pairing
”.
•
On system A, press the key pertaining to the “pre-setting position” where you wish to save system B.
Pairing up CHANNEL 1
Briefly press “n”.
Pairing up CHANNEL 2
Press the “n” key twice.
Pairing up CHANNEL 3
Press the “n” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
