⑬
Voltage And Current Curve: Display the curve of selected slot battery. The
progress of the curve has an auto-scaling function. The yellow line is the voltage
curve and the red line is the current curve.
SETTINGS INTERFACE SPECIFICATION
Access multiple batteries and click the battery icon to switch curves. The selected
battery icon will turn red, and click the red battery icon again to enter the settings
interface. As the following figure shows:
①
Shot: Displaying the current slot information (As pictured above
)
②
Operating Mode: Three modes: Charge, Discharge and Capacity Test; the
default mode is “Charge” (As pictured above
)
③
Current: Four kinds of currents can be selected, 0.5A, 1A, 1.5A and 2.0A;Li-ion
and LiFePO4’s default current is 1.0A; Ni-MH’s default current is 0.5A. (As
pictured above
)
④
Battery type: It will automatically identify Ni-MH and Li-ion batteries when the
batteries are in. When Li-ion batteries are detected, the Li-ion 3.7V charging
program is selected acquiescently; at this time Ni-MH/Cd option is red, which
