8. Bend the boom jib with a movement of the transfer boom so that the boom jib is
completely bent. The grab has been fastened with the lifting boom, loosen the
grab from the boom very carefully because the grab can slip down during the
loosening (risk for accident). Lower the grab by using movements of the boom
jib. Be careful with the swinging movement of the grab when the grab is lowering
downwards, the grab or the hoses of the grab rotator can get broken or the grab
can break something when swinging.
9. Put the front gate of the trailer in its position.
10. Move all the movements of the loader some times back and forth from the end
position to the other, possible air in the system disappears. Be careful when
moving the loader because the movements can be fast if there exists air in the
system.
11. When you have moved the loader, check tightening of the tightening bolts.
Tightening of the bolts must be checked during the operation sometimes, as
well, tighten if needed.
17