Wi-Fi GUI features
XS-2426G-B indoor ONTs have HTML-based Wi-Fi configuration GUIs.
5.12.2
XS-2426G-B ONT considerations and limitations
Table 5-15, “XS-2426G-B ONT considerations and limitations” (p. 60)
lists the considerations and
limitations for Package P XS-2426G-B ONTs.
Table 5-15
XS-2426G-B ONT considerations and limitations
Considerations and limitations
Call History Data collection (ONTCALLHST) is supported, except for the following parameters: RTP packets (discarded), far-end RTCP
and RTCP-XR participation, RTCP average and peak round trip delay, MOS, average jitter, number of jitter-buffer over-runs and under
runs.
Some voice features are configurable on a per ONT basis, including Call Waiting, Call Hold, 3-Way Calling, and Call Transfer.
The following voice features / GSIP parameters are configurable on a per-Client/ per-ONT basis (not per-Subscriber):
• Enable Caller ID and Enable Caller Name ID
• Digitmap and the associated Interdigit and Critical timers and Enter key parameters
• Warmline timer is enabled per subscriber, but the warmline timer value is configured per ONT and must have a lower value than the
Permanent time
• Miscellaneous timers: Permanent, Timed-release, Reanswer, Error-tone, and CW-alert timers
• Features / functions: Message waiting mode, WMWI refresh interval, DTMF volume level
• Service Codes for the following features: CW, Call Hold and Warmline
These feature items are only supported in the mesh root device or when the ONT works as a standalone device.
• Domain group/isolation
• Bridge WAN
• VLAN binding
• SoftGRE
• QoS/Rate Limit per SSID and LAN port
XS-2426G-B unit data sheet
XS-2426G-B special considerations
Nokia ONT
Review
Review
December 2021
Issue 1
61
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA