2
Configure the following parameters:
Table 8-42
RG Troubleshooting Counters parameters
Field
Description
WAN Connection List
Select a WAN connection from the list.
WAN Status
Indicates whether the broadband connections is active (UP) or not (DOWN).
US Throughput
This test is used to determine the upstream throughput/speed.
Click
US Speed Test
to specify the time for the upstream test.
The default is weekly, performed at idle to a public server.
DS Throughput
This test is used to determine the downstream throughput/speed.
Click
DS Speed Test
to specify the time for the downstream test.
The default is weekly, performed at idle to a public server.
US Packet Loss
Displays the number of upstream packages lost.
DS Packet Loss
Displays the number of downstream packages lost.
Latency
This test is used to determine the lowest round-trip time in milliseconds by pinging the target
server multiple times.
Click
Latency Test
to specify the time for the test.
The default is weekly, performed at idle to a public server.
DNS Response Time
This test is used to determine the lowest round-trip time in milliseconds by sending a request to
the target DNS server.
Click
DNS Response Test
to specify the time for the test.
The default is weekly, performed at idle to a public server.
Port mirrors
Source port
Select a source port from the list.
Dest port
Select a destination port from the list.
Direction
Select a direction from the list ( upstream or downstream).
Status
Select a status from the list
3
Click
Save
.
You can click
E
ND OF STEPS
Configure a XS-2426G-B indoor ONT
RG Troubleshooting Counters
Viewing Residential Gateway (RG) troubleshooting counters
Nokia ONT
Review
Review
December 2021
Issue 1
145
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA