Nokia Sprint PCS Vision 6165i, User Manual

Page: 54 / 233

Section 2A: Phone Basics 27
Phone
B
a
sics
Making and Answering Calls
Making Calls
Placing a call from your wireless phone is as easy as making
a call from any landline phone. Just enter the number and
press
, and you’re on your way to clear calls.
To make a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you
make a mistake while dialing, press
( Clear ) to
erase one digit at a time. Press and hold to
erase the entire number.)
3.
Press to make the call. (You must also press
[ Yes ] at the prompt, “Roaming rate applies. Place call?”
to make a call when you are roaming and Call Guard is
enabled. See “Controlling Your Roaming Experience” on
page 67.)
4.
Press or close the phone to end the call when you
are finished.
You can also place calls from your phone by using Sprint PCS
Voice Command, speed dialing numbers from your contact
list, and by using your Call logs.
Dialing Options
When you enter numbers in standby mode, you may press
( Options ) to see a variety of commands that can be applied to
the number you are entering.
Tip: To redial your last outgoing call, press the send/call key
twice from standby mode.