Nokia RM-4 Disassembly Instructions Manual Download Page 6

Page: 6 / 10

RM-4/RM-5

CCS Technical Documentation

Disassembly Instructions

COMPANY CONFIDENTIAL

ISSUE 1 02/2004

Unlock the LCD snaps of the LCD Light guide on
the bottom side.

Unlock the LCD snaps of the LCD Light guide on
the top side.

Use tweezers when removing the Speaker.

Take the Engine Module from the D-Cover.

Lever out the Shielding.

If the System Connector is tight in the D-Cover,
SRT-6 should be used to loosen it.

Summary of Contents for RM-4

Page 3: ...ssembly Instructions CCS Technical Documentation ISSUE 1 02 2004 COMPANY CONFIDENTIAL 3 Copyright 2003 Nokia All Rights Reserved Table of Contents Page No Disassembly Instructions 5 Domesheet Exchange Instructions 8 ...

Page 6: ...ll Rights Reserved Unlock the LCD snaps of the LCD Light guide on the bottom side Unlock the LCD snaps of the LCD Light guide on the top side Use tweezers when removing the Speaker Take the Engine Module from the D Cover Lever out the Shielding If the System Connector is tight in the D Cover SRT 6 should be used to loosen it ...

Page 7: ... 02 2004 COMPANY CONFIDENTIAL 7 Copyright 2003 Nokia All Rights Reserved Note that the Microphone fits very tight in its guidance Carefully push out the Microphone from the System Connector Moderate force is required for this action Lever out the Vibra Motor with tweezers ...

Page 9: ...ight 2003 Nokia All Rights Reserved Place the Engine Module into the D Cover Carefully press on the Dome sheet to the Engine Module to avoid bubbles Finally check if the holes of the Dome Sheet match exactly the ones in the Engine Module Otherwise change the Dome Sheet again Check the Keyboard functionality ...