FS-52
Flash adaptor
FS-52 is an interface between a phone the SS-46 and/or the SS-62
devices. It is used for testing, EM calibration and flashing assembled
phones.
Features include:
• Used with SS-46 for phone flashing.
• Used with CU-4 for flashing and management calibration.
• Used with SA-130 RF coupler for go/no-go RF tests.
• Easy phone attachment and detachment.
• Reliable phone locking.
• Replaceable test pins.
Phone Mounting Instructions:
1 At an angle, align the battery connector blades to adaptor battery
connector clips.
2 Ensure blades lock into adaptor clips.
3 Carefully lower phone down while pulling pin lock lever back.
4 Once phone is properly seated, release the locking pin lever to lock
phone.
5 Verify phone comes up in the chosen selected mode.
Note:
Always use adaptor lever before removing phone from
adaptor, otherwise, adaptor locking pin could break.
RM-164
Service Tools and Service Concepts
Page 2 –8
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2007 Nokia. All rights reserved.