Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
17.Okt.2006
20
Service Manual N92 RM-100
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(53)
1. The procedure to disassemble the
Hinge Module
Assy
is
shown here. The disassembly of the lower block was already
done.
2. Carefully pull out the cables to achieve the screws.
3. Undo both screws and discard them.
4. Do not use them again.
5. Carefully remove the
Camera Support
.
6. Slot the
Camera Cable
through the recess of the hinge.
UPPER BLOCK - HINGE MODULE DISASSEMBLY
11.
