Nokia N91-2, User Manual

Page: 81 / 146

My own
69 Copyright © 2006 Nokia. All rights reserved.
When you are talking in a channel, the first person to press
when someone stops talking talks next.
When you have finished the push-to-talk call, select
Disconnect or press .
To view currently active members of a channel when you
have an active call to the channel, select
Options > Active
members .
You can also invite new members to a channel when you
are connected to it, select
Options > Send invitation to
open the invitation view. You can only invite new members
when you are the host of a private channel, or when the
channel is a public channel. Channel invitations are text
messages.
Respond to a channel invitation
To save a received channel invitation, select Options >
Save PTT channel . The channel is added to your PTT
contacts, channels view.
After you save the channel invitation, you are asked if you
want to connect to the channel. Select
Yes to open the
push-to-talk sessions view. Your device logs in to the
service, if you are not logged in already.
If you reject or clear the invitation, the invitation is stored
in your messaging inbox. To join the channel later,
open the invitation message, and accept.
View the push-to-talk log
Press , and select My Own > Push to talk > Options >
PTT log . The log contains the following folders: Missed
calls , Received calls , and Created calls .
You can initiate a one-to-one call from PTT log by pressing
.
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialled calls, press
, and select My Own > Log >
Recent calls . The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number,
and press .
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select