CCS Technical Documentation
3 - Service Software
Company Confidential
NEM-4
Issue 1 09/2003
Copyright
2003 Nokia Corporation
Page 3-13
Company Confidential
Choose now Flash and you will see the following dialogue box.
Figure 7: Choosing the correct product code
Usually the electronic product code inside the device gives you the correct files to update
into the phone. There is one exception to this rule. Exchange units can be updated with
other SW than the one mentioned in the product code field.
Alternatives:
•
In normal customer SW update case just press
OK
and SW update starts.
•
In case you are updating the exchange unit to give it to the customer,
choose from the product code list the variant customer has. Basically
product code in the type label of the device should tell exactly the variant
customer has. However, if customer’s transceiver has already been
exchanged once, there may be contradiction between variant and type
label. Then the SW in the exchange device has to be same variant as to be
given to customer.
