Nokia MulteFire Quick Manual Download Page 2

NOKIA

 

2

 

  

  Nokia Industrial MulteFire Router Quick Guide 

The information in this document applies solely to the hardware/soft

ware product (“Product”) specified herein, and only as specified herein. This 

document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may not be used except for the p

urposes defined in the 

agreement between You and Noki

a Solutions and Networks (“Agreement”) under which this document is distributed. No part of this document may be 

used, copied, reproduced, modified, or transmitted in any form or means without the prior written permission of Nokia Solutions and Networks. If you 
have not entered into an Agreement applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this 
document in any manner and You are obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof. The document 
has been prepared to be used by professional and properly trained personnel, and You assume full responsibility when using it. Nokia Solutions and 
Networks welcome Your comments as part of the process of continuous development and improvement of the documentation. This document and its 
contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity, fitness for purpose or 

performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the 

right to change any such information and statements without notice. Nokia has made all reasonable efforts to ensure that the content of this 
document is adequate and free of material errors and omissions, and Nokia Solutions and Networks will correct errors that You identify in this 
document. But, Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia 
Solutions and Networks does not warrant that the use of the software in the Product will be uninterrupted or error-free. NO WARRANTY OF ANY KIND, 
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, 
NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO 
EVENT WILL NOKIA SOLUTIONS AND NETWORKS BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS 
OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR 
OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. This document is Nokia Solutions and Networks' proprietary and confidential information, which 
may not be distributed or disclosed to any third parties without the prior written consent of Nokia Solutions and Networks. Nokia is a registered 
trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners, and they are 
mentioned for identification purposes only. Copyright © 2021 Nokia Solutions and Networks. All rights reserved.

 

 

 

Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of its products and services. We would like 
to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging 
and follow the recommendations for power use and proper disposal of our products and their components. 

If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia 
Solutions and Networks for any additional information. 

Issue 01, Approval date: June 2021

 

Notice:

  

The operating temperature range of the device is from -40 C (-40 F) to 70 C (158 F).

 

Important Notice on Product Safety: 

This product may present safety risks due to laser, electricity, heat, and other sources of danger. 

Only trained and qualified personnel may install, operate, maintain, or otherwise handle this product and 
only after having carefully read the safety information applicable to this product. 

The safety informa

tion is provided in the Safety Information section in the “Legal, Safety and 

Environmental Information” part of this document or documentation set.

 

Summary of Contents for MulteFire


















Reviews: