background image

GB 14

Video recorder

With a Video Cassette Recorder (VCR) connected you can watch/
record video tapes

*

.

If your VCR is connected with a SCART cable and you press the
Start button on the VCR, the playback will start and interrupt the
TV programme from the Mediamaster.
To watch TV programmes again , press the 

TV

 button on the re-

mote control for the Mediamaster, or stop the VCR.

Please note, that during the recording of a programme, 

every-

thing

 shown on the screen will be registered! For example: If you

call up a Menu from the Mediamaster on the screen, the menu
will be recorded!

*

Record/playback is possible if the Video Recorder is connected

to the VCR SCART on the Mediamaster. Only playback is pos-
sible if you connect the Video Recorder to the AUX SCART.

List of TV channels and Radio channels

During viewing TV or listening to Radio channels, you get a pro-
gramme list onto the screen by pressing the 

OK

 button.

If you have made yourself a favourite list of frequently visited
channels you can alter between “All channels” and “Favourites”
with the 

Left/Right

 buttons. (How to make a Favourite list will

be described further on in this Manual).

You can change to another channel by stepping with the 

UP/

DOWN

 buttons and then press the 

OK

 button.

To move faster (10 channels at a time) between channels you can
also use the 

double arrow

 buttons.

Summary of Contents for Mediamaster 9600C
























Reviews: