Nokia Mediamaster 230 S, User Manual, Page: 13 / 40

GB 13
Connecting a TV and VCR
Refer to your VCR’s manual for full instructions.
• Connect one SCART cable from the main SCART socket on the
TV to the TV SCART socket on the Mediamaster.
• Connect another SCART cable from the VCR
to the AUX SCART socket on the Mediamaster.
• Connect the RF cable from the RF output on the VCR to the
TV aerial input on the TV.
• Connect the TV aerial to the RF input socket on the VCR.
VCR
SCART
SCART
RF
Nokia smart switch
VCR
• Connect a SCART cable from the main SCART socket on the
TV to the TV SCART socket on the Mediamaster.
• Connect a SCART cable from the VCR to the AUX SCART
socket on the Mediamaster.
• Connect an RF cable from the RF output on the VCR to the TV
aerial input on the TV.
• Connect an RF cable from the RF output on the analogue re-
ceiver to the RF input socket on the VCR.
• Connect the TV aerial to the RF input socket on the analogue
receiver.
In order to switch the signal from the dish between the ana-
logue and digital receivers, you will need a Nokia smart switch
(at A B in the diagram)
or a Universal Twin LNB.
With Nokia smart
switch
Analogue receiver
SCART
RF
Nokia smart switch
• Connect a coaxial cable from output A on the smart switch (ac-
cessory) to the LNB socket on the analogue receiver.
• Connect a coaxial cable from output B on the smart switch to
the ANTENNA socket on the Mediamaster .
The analogue receiver must be switched OFF (in standby
mode) when you want to watch digital satellite channels
from the Mediamaster.
Connecting an analogue satellite receiver
and a VCR
Connecting to the TV
• Connect the SCART cable between the main SCART socket
on the TV and the TV SCART socket on the Mediamaster.
• Connect the TV aerial to the TV.
SCART
Installation of the Mediamaster