background image

Do not use or store the device in

dusty or dirty areas. Moving parts

and electronic components can

be damaged.

Do not store the device in high

temperatures. High temperatures

can shorten the life of the device,

damage the battery, and warp or

melt plastics.

Do not store the device in cold

temperatures. When the device

warms to its normal temperature,

moisture can form inside the

device and damage electronic

circuits.

Do not attempt to open the

device.

Unauthorised modifications may

damage the device and violate

regulations governing radio

devices.

Do not drop, knock, or shake the

device. Rough handling can break

internal circuit boards and

mechanics.

Only use a soft, clean, dry cloth to

clean the surface of the device.

Do not paint the device. Paint can

clog the moving parts and

prevent proper operation.

Switch off the device and remove

the battery from time to time for

optimum performance.

Recycle

Always return your used electronic

products, batteries, and packaging

materials to dedicated collection

points. This way you help prevent

uncontrolled waste disposal and

promote the recycling of materials.

Check product environmental

information and how to recycle your

Nokia products at www.nokia.com/

werecycle, or with a mobile device,

http://nokia.mobi/werecycle.

ENGLISH

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

Summary of Contents for MD-50W









Reviews: