Nokia IP561, Installation Manual, Page: 22 / 96

Overview
22 Nokia IP561 Security Platform Installation Guide
Console Port
Use the built-in console port, shown in Figure 1 , to supply information that makes the appliance
available on the network at speeds up to 9600 bps. The default configuration of the serial ports
are: 9600 baud, 8 bits, no parity, and 1 stop.
Table 5 provides pin assignment information for
console connections. If you need to access the devices locally, you must use the console port.
Table 5 Pin Assignments for Console Connector and Console Cable
The console cable provided with the IP561 is comprised of two parts:
„
a 6-foot rollover cable with RJ-45 terminations
„
an RJ-45 to DB-9 adapter
On the opposite end of the console cable, connect the RJ-45 to the DB-9 adapter, which you can
then connect to the host terminal.
Auxiliary Port
Use the built-in serial (AUX) port, shown in Figure 1 , to establish a modem connection for
managing the appliance remotely or out-of-Band. The default configuration of the serial ports
are: 9600 baud, 8 bits, no parity, and 1 stop bit.
Table 6 provides pin assignment information for
modem connections.
Console Port
(DTE) RJ-45 to RJ-45 Rollover
Cable
RJ-45 to DB-9
Terminal
Adapter
Console Device
Signal RJ-45 Pin RJ-45 Pin DB-9 Pin Signal
RTS 1 8 8 CTS
DTR 2 7 6 DSR
TxD 3 6 2 RxD
GND 4 5 5 GND
GND 5 4 5 GND
RxD 6 3 3 TxD
DSR 7 2 4 DTR
CTS 8 1 7 RTS