Nokia IP30 - Satellite Plus - Security Appliance User Manual Download Page 75

Page: 75 / 164

Managing Your Network

Nokia IP30 User Guide

If a new firmware was installed, the IP30 is restarted.

The services to which you are subscribed to are now
available on your IP30 and listed on the Account page.

The Services submenu includes the services you are subscribed to.

Viewing Services Information

The Account page Service Status area lists the services available in
your service plan.
The following information is displayed for each service:

Canceling Subscription Services

You can cancel your subscription to the services provided by your
service center.

Name

Name of the service

Subscription

status of your subscription to the service
(Subscribed or Not Subscribed)

Status

Status of the service

Connected

You are connected to the service from the
Central Location.

N/A

Service not available

Mode

Mode to which the service is set. This
depends on the IP30 management.

Summary of Contents for IP30 - Satellite Plus - Security Appliance





































































































































































Search results

Summary of Contents for IP30 - Satellite Plus - Security Appliance

Reviews:

Related manuals for IP30 - Satellite Plus - Security Appliance

Brands by name

Popular brands

Nokia IP30 - Satellite Plus - Security Appliance, User Manual

Search results

Summary of Contents for IP30 - Satellite Plus - Security Appliance

Reviews:

Related manuals for IP30 - Satellite Plus - Security Appliance

Brands by name

Popular brands