Nokia FastMile Outdoor Unit User Manual
Installation procedure
Issue: 01P03
3TG-00088-AAAA-TCZZA
47
6.3
Installation prerequisites
Be sure to observe the following prerequisites before installing the Nokia FastMile
Outdoor Unit:
•
Installation personnel must have knowledge about installing the unit
•
A valid Nano/4FF SIM card is needed for the Nokia FastMile Outdoor Unit to
communicate with the LTE network
•
If required, a Cat5e shielded Ethernet cable that can be connected to the Ethernet
cable of the Nokia FastMile Outdoor Unit to make it longer, up to a maximum of
40 m (131 ft) in combined length
•
A ground cable is needed if the Nokia FastMile Outdoor Unit will be grounded
separately from the indoor ground provided by the Ethernet cable; requires a hex
key suitable for hex socket knurled head cup screw assemblies, ISO 4762-M5X8
•
Appropriate fasteners for securing the Nokia FastMile Outdoor Unit to an outside
wall
•
Silicone or other waterproof sealing or caulking compound
•
Mechanical tools are required (but are not included) for mounting the Nokia
FastMile Outdoor Unit:
•
Phillips screwdriver to open the SIM slot
•
hex key as described above if ground cable is needed
•
The Nokia Field Assistant app must be installed on an Android mobile phone
through Google Play and the mobile phone must have a camera and hardware
compass and Android OS 6.0 (Marshmallow) or above
•
The following certificates need to be stored in the download folder of the mobile
phone:
•
pmaCA.pem
•
logserverCA.pem
•
diagserverCA.pem
•
swserverCA.pem
•
The LTE base station that will be used by the Nokia FastMile Outdoor Unit must
be available and functioning
•
The indoor unit, such as a residential gateway like the Nokia 7368 ISAM CPE
A-020W-A, that will be connecting to the Nokia FastMile Outdoor Unit must be
available and reachable; if the indoor unit cannot supply PoE power to the Nokia
FastMile Outdoor Unit, then a Nokia-approved PoE injector must be used in
conjunction with the indoor unit
