background image

NPM-2NX

Car Kit

CCS Technical Documentation

Page 4

 

ã

Nokia Corporation

Issue 1 07/02

Please refer to the telephone’s User’s Guide for instructions on the telephone’s operation,
care and maintenance, including important safety information.

Note: Read the warnings below before beginning the installation procedure.

_______________________________________

WARNINGS

1 ENSURE THAT THE VEHICLE’S BATTERY IS DISCONNECTED BEFORE YOU

START THE INSTALLATION PROCEDURE, AND THAT IT REMAINS DISCON-

NECTED DURING THE PROCEDURE.

2 DO NOT SMOKE OR USE OPEN FLAMES WHEN WORKING NEAR THE VEHI-

CLE’S FUEL SYSTEM.

3

ENSURE THAT THE VEHICLE’S ELECTRICAL CABLES, HYDRAULIC

 

LINES, FUEL

LINES, AND SAFETY EQUIPMENT ARE NOT DAMAGED DURING INSTALLA-

TION.

4

ENSURE THAT NORMAL CONTROL AND OPERATION OF THE VEHICLE

 

IS NOT

IMPAIRED BY THE INSTALLATION, PARTICULARLY THE BRAKES AND STEER-

ING. ENSURE THAT AIRBAG OPERATION IS NOT OBSTRUCTED.

5 ELECTRONIC AND OTHER SOPHISTICATED SYSTEMS (e.g. SPEED CONTROL,

ABS ANTI–LOCK BRAKE, FUEL INJECTION, NAVIGATION, AND AIR–BAG

SYSTEMS) ARE RELATIVELY IMMUNE TO MALFUNCTION CAUSED BY

NEARBY RADIO TRANSMISSIONS. HOWEVER, SHOULD YOU EXPERIENCE

FALSE OPERATION OF THESE SYSTEMS OR ARE IN ANY DOUBT WHATSO-

EVER AS TO THEIR FUNCTIONALITY, PLEASE CONSULT THE VEHICLE’S

DEALER.

6 THE CAR KIT IS SUITABLE FOR USE ONLY IN VEHICLES WITH A 12 V NEGA-

TIVE GROUNDING. USE ON OTHER SUPPLY VOLTAGES OR ALTERNATIVE

POLARITY WILL DAMAGE THE EQUIPMENT.

7

THE PHONE SHOULD NOT BE LEFT SWITCHED ON FOR EXTENDED

 

PERIODS

WITHOUT RUNNING THE VEHICLE’S ENGINE. FAILURE TO COMPLY COULD

DRAIN THE VEHICLE’S BATTERY.

Unpacking

Carefully unpack the equipment and ensure that the following items are present:

• Advanced Active Car HolderMCC-1
• Advanced Handsfree UnitHFU-2
• Power CablePCH-4J
• Mounting PlateMKU-1
• Swivel MountHHS-9
• Handsfree MicrophoneHFM-8

Summary of Contents for CARK-91











Reviews: