Nokia C7-00
RM-675
Service Manual Level 1&2
21
Confidential | Copyright © 2010 Nokia | All rights reserved
Version 2.0
10.
ASSEMBLY INSTRUCTIONS
For assembly, you will need the Nokia Standard
Toolkit version 2, and the RF connector assembly tool
SS-231.
1) Place the IMAGING PROCESSOR SHIELDING LID with
the tweezers.
2) Press the shielding lid down gently with the SS-93
to attach it to the ENGINE BOARD.
3) Place the CAMERA MODULE with the tweezers.
4) When inserting the CAMERA MODULE, check that
the shown clip is on the same side as the guiding
notch.
5) Press the CAMERA MODULE down carefully with the
SS-93 to attach the camera retaining clips.
