Nokia BT FUSION 6136, User Manual

Page: 70 / 225

S e t t i n g s
37
9. Settings
Use this menu to set or change your Wi-Fi settings, profiles,
themes, personal shortcuts, time and date settings, call settings,
phone settings, main display settings, mini display settings, tone
settings, enhancement settings, configuration settings, security
settings, and to restore factory settings.
■
Wi-Fi
Note: Some places, like France, have restrictions on the use of wireless
LAN. Check with your local authorities for more information.
This device can detect and connect to a wireless local area network (LAN) through
call over local access (UMA). This technology allows a seamless handoff of mobile
voice and data from a wide area cellular network to a wireless LAN (WLAN), so it
is possible to connect at a high speed to the Internet from virtually anywhere.
Before you can start using UMA, you must first obtain a UMA account with your
service provider. Since this device was specially designed to detect and connect
to WLAN or Wi-Fi, the proper settings should already be configured in your phone.
For more information, contact your service provider.
If you move the device to another location within the wireless LAN and out of
range of a Wi-Fi access point, the roaming functionality can automatically
connect your device to another access point that belongs to the same network.
As long as you remain within range of access points that belong to the same
network, your device can stay connected to the network.
A Wi-Fi connection is established when you create a data connection using a
Wi-Fi access point. The active Wi-Fi connection is ended when you end the
data connection.
Features using Wi-Fi, or allowing such features to run in the background while
using other features, increase the demand on battery power and reduce the
battery life.
Tutorial
The first time you turn on your phone, Your phone can use Wi-Fi for calls. Run
the tutorial now and then connect Wi-Fi? is displayed. To run the tutorial and
connect to Wi-Fi, select Yes and follow the prompts. If you do not want to run the
tutorial and connect to Wi-Fi, select No . A message asks if you want to see the
tutorial and connect to Wi-Fi the next time you turn on the phone. Select No to
prevent the first message from appearing every time you turn on the phone.